6
MB3197-EN
Figure 2
Figure 3
Figure 4
Assembly
Figure 2
The standard version is delivered complete.
All you need to do is unfold the wheelchair and fit
the leg supports where necessary.
Unfolding the wheelchair
Figure 3
To unfold the wheelchair, press down with the flat
of your hand on the cover by the seat tubing.
Note!
Do not hold around the seat tubing as your fingers
can get caught.
Put the seat cushion (accessory) into position
ensuring that it sits properly on the seat fabric.
Folding the wheelchair
Figure 4
Remove the seat cushion (accessory) and pull up
the footplates or remove the leg supports before
folding the wheelchair.
Take hold of the seat cover and lift straight up.
The chair will fold together. Check that the back
cover has folded backwards.
Transport
The wheelchair is suitable for land and/or air
transport.
Parts of the wheelchair that can easily be
detached should be removed when transporting
the wheelchair.
• Armrests
• Legrests
• Rear wheels
Once the wheelchair is in the vehicle, it must
be secured with an ISO 10542 approved tie-
down system that is suited to the weight of that
particular wheelchair including any options.
See “Safety in cars” on page 27 for using Exigo
30 as a passenger seat in a motor vehicle.
ASSEMBLY AND TRANSPORT
