Breezy Exigo 30 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Breezy Exigo 30 Скачать руководство пользователя страница 28

28

MB3197-EN

Figure 50

Fastening the seat belt:

• The pelvic-belt restraint must be fastened at

as steep an angle as possible; between 30°
and 75°

• The shoulder-belt restraint is fastened over the

shoulder and chest

• The seat belt is fastened as tightly to the body

as possible and must not be twisted

• Make sure the belt restraints is not kept away

from the body by the wheelchair parts, such as
armrests and wheels. For correct positioning,
see figure below

• The chair must not be tilted backwards when

used as a passenger seat in a car

WARNING
a) Where possible, the wheelchair should be in a forward facing

direction and secured in accordance with the instructions from
the manufacturer of the fastening system.

b) This wheelchair is approved for use in cars and meets the

requirements for forward facing transport and head on
collisions. The wheelchair has not been tested for other
positions in a vehicle.

c) The wheelchair has been dynamically tested in a forward facing

direction, with the user secured by both a stomach and chest
belt (3-point seat belt)

Make sure that the seat

belt is not kept away from

the body by the wheelchair

parts, such as armrests and

wheels.

SAFETY IN CARS

«
...
26
27
28
29
30
...
»

Содержание Exigo 30









































Отзывы:

Нет отзывов