Breeze33 BZ3310WAC1 Скачать руководство пользователя страница 3

When the air filter is to be 
removed, do not touch the metal 
parts of the unit.

It may cause an injury.

Do not clean unit when power is on 
as it  may c ause fi re an

  d el ectric sh ock,

it may cause an injury.

Operation with windows opened 
may cause wetting of indoor and 
soaking of household furniture.

When the unit is to be cleaned, 
switch off, and turn off the circuit 
breaker.

Use caution when unpacking and 
installing. Sharp edges could cause injury.

Do not clean the air conditioner 
with water.

Water may enter the unit and 
degrade the insulation. It may 
cause an electric shock.

This could injure the pet or plant.

It may cause electric shock and 
damage.

Do not put a pet or house plant 
where it will be exposed to direct 
air flow.

Ventilate the room well when
used together with a stove, etc.

An oxygen shortage may occur.

Do not use this air conditioner to 

preserve precision devices, food,

pets, plants, and art objects.It may 

cause deterioration of quality, etc. 

It may cause failure of product or 

fire.

Do not use for special purposes.

If water enters the unit, turn the unit off at the power 
outlet and switch off the circuit breaker. Isolate supply 
by taking the power-plug out and contact a qualified 
service technician.

!!

! !

! !

! !

It may cause failure of appliance 
or accident.

Appearance may be deteriorated 
due to change of product color or 
scratching of its surface.

If bracket is damaged, there is 
concern of damage due to falling 
of unit.

There is danger of fire or electric 
shock.

Operation without filters maycause 

failure.

It contains contaminants and 

could make you sick.

Stop operation and close the 
window in storm or hurricane.

! !

Do not use strong detergent 
such as wax or thinner but use 
a soft cloth.

Ensure that the installation bracket of the 
outdoor appliance is not damaged due 
to prolonged exposure.

Hold the plug by the head of the 
power plug when taking it out.

! !

Turn off the main power  
switch when not using the

 

unit for a long time.

! !

! ! ! !

Always insert the filters securely. 
Clean filter once every t wo w

  eeks.

! !

Do not place heavy object on the power
cord and ensure that the cord is not 
compressed.

Do not drink water drained 
from air conditioner.

   This appliance is not intended for use by persons 
   (including children) with reduced physical ,sensory 
   or mental capabilities or lack of experience and 
   knowledge, unless t hey h aveb eengi vensu pervision
   or instruction concerning use of the appliance by 
   a person responsible for their safety. 
   Children should be supervised to ensure that they 
   do not play with the appliance. 
   If the supply cord is damaged, it must be replaced 
   by the manufacturer, its service agent or similarly 
   qualified persons in order to avoid a hazard.

CAUTION

2

CAUTION

Do not place obstacles around 
air-inlets or inside of air-outlet.

   The appliance shall be installed in accordance 
   with national wiring regulations.

Do  not  operate  your  air  conditioner  in  a  wet  room
 such  as  a  bathroom  or  laundry  room.

    The appliance with electric heater shall have  at

l east 1 m

  eter s pace to  th e co mbustible materials.

Contact the authorised service technician for
repair or maintenance of this unit.
Contact the authorised installer for installation
of this unit.

IMPORTANT SAFETY INSTRUCTIONS

Содержание BZ3310WAC1

































Отзывы: