Breezair EXT series, Инструкция по установке и эксплуатации

Страница: 9 / 16

WIRING DIAGRAMS
Wiring Option 1
Fig. 24 shows the field wiring for a 2
speed cooler WITH LINE SUPPLY
WIRED FIRST TO THE COOLER (not
first to the wall control).
NOTE! the cooler must be connected
in this way for successful operation of
the optional Salinity Manager/Auto-
Drain feature, as it requires a constant
source of power.
Wiring Option 2
Fig. 25 shows the field wiring for a 2
speed cooler WITH LINE SUPPLY
WIRED FIRST TO THE WALL
CONTROL (not first to the cooler).
NOTE! Option 2 will not support the
optional Salinity Manager/Auto-Drain
feature.
FOR INFORMATION CONCERNING
OTHER WIRING CONFIGURATIONS
CALL BREEZAIR TECHNICAL
DEPARTMENT. (800) 926-6824
HIGH
FIELD WIRING HIGH
VENT
OFF
LOW
LOW
COOL
GROUND/EARTH
TERMINAL BOX
WALL
CONTROL
HOT WIRE/LINE VOLTAGE
USA WIRING DIAGRAM - 2 SPEED
SINGLE PHASE 115V (LINE VOLTAGE
WIRED TO COOLER)
COMMON/NEUTRAL
MOTOR CURRENT (AMP)
TEST POINT
FAN
CONTROL
PUMP
CONTROL
PUMP
HOT WIRE TO WALL CONTROL
GROUND/EARTH
COMMON/NEUTRAL
FACTORY WIRING (DO NOT DISTURB)
ILL1026-A
Wiring Option 1
HIGH
FIELD WIRING HIGH
VENT
OFF
LOW
LOW
COOL
GROUND/EARTH
TERMINAL BOX
WALL
CONTROL
HOT WIRE/LINE VOLTAGE
USA WIRING DIAGRAM - 2 SPEED
SINGLE PHASE 115V (LINE VOLTAGE
WIRED TO WALL CONTROL)
COMMON/NEUTRAL
MOTOR CURRENT (AMP)
TEST POINT
FAN
CONTROL
PUMP
CONTROL
PUMP
GROUND/EARTH
COMMON/NEUTRAL
FACTORY WIRING (DO NOT DISTURB)
ILL1027-A
Wiring Option 2
24
25
7 7 Wiring Diagrams
Reset Pump Circuit Breaker 2 speed
Coolers ONLY:
(1) Disconnect power supply at the
main panel.
(2) Remove the junction box from the
blower housing.
(3) Invert the junction box and locate
the circuit breaker.
(4) Press the button until it "clicks" and
remains in. (Fig 26).
(5) Reposition the junction box on the
blower housing (ensure locking screw
is reinstalled. Fig 28).
Should a 2 speed motor overload, one
of the circuit breakers will trip, showing
a white button. To reset, press this white
button until it "clicks" and remains in.
26
ILL536-B
EXT COOLER
PUMP
CIRCUIT BREAKER
ILL813-A
28
27