15
Chapter 1: Hardware insertion and Bed Cabinet assembly.
Stand the Bed
Cabinet upright and
against the wall at
the desired location.
The Bed Cabinet
should be flat against
the wall. Keep at
least a 1/2” clearance
on the sides to allow
for later adjustment.
If your baseboard
is larger than the
base notch provided,
please see the
Troubleshooting
section on Page 8.
FIG. 1G
STEP 7
Attach
“
Headboard
” and
“
Bed Cabinet
Bottom Nailer
”
as shown in Fig.
1F and tighten
cam fittings.
The Headboard
will normally sit
at a slight angle.
FIG. 1F
STEP 6
