Brecknell MBS-150, Руководство пользователя

Страница: 8 / 31

8 MBS Series User Instructions
6.0 Calibration
Occasionally, you may need to calibrate your balance with an appropriate weight.
There are two types of calibration possible: sensitivity calibration and linear
calibration. Linear calibration should only be attempted by a qualified service
technician with correct weights. This section explains how to perform each type of
calibration.
Sensitivity Calibration
1. With the scale in regular weighing mode, press the Tare button to zero the
balance.
2. Press the Cal button.The balance will show “Scale”.
3. Press the Tare button. The balance will display one of the accepted calibration
weights.
The balance can only be calibrated in grams.
4. Press the Mode key to toggle between acceptable calibration weights.
5. Press Tare . The balance will flash “0” briefly and then flash the calibration
weight.
6. Place the correct amount of weight (in grams) on the platform and press the
Tare button.
7. The calibration weight will continue to flash briefly and then become stable.
8. Once the weight is stable, remove the weight from the balance. The scale has
now been calibrated and is in regular weigh mode.
9. Press the Tare key if the scale does not return to zero.
Linear Calibration
1. With the scale in regular weighing mode, press the Tare button to zero the
balance.
2. Press the Cal button.The balance will show “Scale”.
3. Press the Mode button. The balance will show “Line”
4. Press Tare . The balance will flash “0” briefly and then flash the first calibration
weight.
5. Place the correct amount of weight (in grams) on the platform and press the
Tare button.
6. The balance will flash the next calibration weight.