Brecknell MBS-150 Скачать руководство пользователя страница 2

Declarations of compliance

United States

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in 
a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense.

Canada

This digital apparatus does not exceed the Class A limits for radio noise emissions from 
digital apparatus set out in the Radio Interference Regulations of the Canadian 
Department of Communications.

Le présent appareil numérique n

émet pas de bruits radioélectriques dépassant les 

limites applicables aux appareils numériques de la Classe A prescrites dans le 
Règlement sur le brouillage radioélectrique edicté par le ministère des 
Communications du Canada.

EMC compliance

The following warning may be applicable to your machine.

WARNING

: This is a class A product. In a domestic environment this product may 

cause radio interference in which case the user may be required to take adequate 
measures.

MBS series_u_en_500064.book

Содержание MBS-150
































Отзывы: