Brecknell DS 1000-LCD, Руководство оператора

Страница: 18 / 31

AWT35-100107 Rev AB 18/30
AUTO
AUTO = if selected, acts as the AVERAG
mode and after each NLD.RNG zero, any
loads over (NLD.RNG), is hold on the
display.
AVG.TIM
Average
1 ~ 60 5
Averages weights in Hold mode for: 1~60
seconds.
STB.TIM
Stable
3*AVG.TI
M ~ 255
15
Allows 3*(AVG.TIM) ~ 255 seconds for
stable conditions to be met in Hold mode.
HLD.TIM
Hold
0 ~
65535
0
Displays Hold mode weight for:
0
= until HOLD key pressed;
1~65535 = the scale exits the Hold mode
after 1 ~ 65535 seconds.
HLD.RNG
Oscillations
0 ~ 255 5
Sets the weight oscillation range that can
be averaged in Hold mode:
0 = any weight range can be averaged;
1 ~ 255 = only the weight which oscillates
within the 1 ~ 255 div range can be
averaged.
NLD.RNG
No Load
Detected
Range
1 ~ 255 10
Sets the weight range that the indicator
considers as the Zero range for the
relevant function e.g. Auto Hold Mode.
1 ~ 255 = the range of weight is 1 ~ 255
div.
Note: It must be above the Config- Motion .
A.OFF.T 0 ~ 255 3
Sets the auto off time:
0 = disabled;
1 ~ 255 = if in standby mode for 1~ 255
minutes, turn the scale off.
LCD.BLT
AUTO
AUTO
Sets the LCD backlight:
Auto: if in standby mode for 10 seconds,
turn the display backlight off.
OFF
：
always off;
ON
：
always on.
OFF
ON
LCD.CST CST1-5 CST5
Adjusts the LCD contrast