Brecknell DS 1000-LCD, Руководство оператора

Страница: 15 / 31

AWT35-100107 Rev AB 15/30
5 Menus
There are four menus that allow you to configure, enable, or execute specific functions or options.
• User and Diagnostics Menu, page 16
•
Calibration Menu, page 17
•
Service Configuration Menu, page 18 .
5.1 User Menu
In the User Menu there are various submenus available to configure specific sections of the scale
operating modes, including the print and communication settings.
In general weighing mode, press the
HOLD
and
ZERO/ON/OFF
keys. Release the keys when the
“USER” message pops up to open the User Menu.
Navigate the menu using the keys, press the
TARE
key to confirm or the
ZERO/ON/OFF
key to cancel the operation / exit the menu.
5.1.1 User Options
USER
SubMenu1 SubMenu2 Option Default Description
RESET
NO
NO NO
Returns the USER parameter to the factory
setting
YES
RS232
Port
(com1)
BAUD.RT
600
9600 Sets the baud rate of com1
1200
2400
4800
9600
19200
BYT.FMT
8N1
8N1
Sets the data bits format of com1
7O1
7E1
7O2
7E2
OUT.MOD
NONE
PRTCMD
Sets the output mode of com1:
NONE = no communication;
CONT = continuous output;
PRINT = press PRINT key for output;
CMD = via print format command only;
PRT.CMD = output with PRINT key and
print format command ( See FMT ) ;
STABLE = output when the weight stable
condition is met (See Motion settings)
Note: when set to PRINT or CMD mode,
the weighing must be in stable condition.
CONT
PRINT
CMD
PRTCMD
STABLE