© BREATHESAFE 2021
PAGE 7
www.breathe-safe.com.au
Delivering Innovative Climate Solutions Worldwide
Controlled document:
Issue Date:
C o n t e n t s
1 USER GUIDE
1 Key Features
2 WARNING
3 CONTROLLER APPEARANCE
4 FUNCTIONS
5 OPERATING INSTRUCTIONS
5 Enter Setup Mode
6 Change Date and Time
6 Change Pressure Setpoint
6 Change ALarm Setpoint
7 Enable / Disable Buzzer
7 Change Alarm DELAY Settings
7 Change Service Reminders
8 Calibrate Zero Sensor
8 Reset Data Log
8 Test Inputs Option
9 TECHNICAL DETAILS
9 Map of Functions
11 General Arrangement
12 Connector Pinout Details
14 Installation
15 Fan Speed Control Output
15 Mounting
15 Supply Power
15 Calibration
15 Control Override
16 Data Logging Information
20 BREATHESAFE WARRANTY
21 CONTACT US
I N P R E S S T S
Controlled document:
M-0002B
Revision:
B
Issue Date:
30 August 2021
ENABLE / DISABLE BUZZER
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Site Access Button > Adjust Setpoint.
Enter Setup mode and select ADJUST SETPOINT button. To disable
buzzer, toggle through ENABLED and DIABLED button. When set
correctly, press the SAVE button.
CHANGE ALARM DELAY SETTINGS
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Site Access Button > Alarm Setting.
The Alarm Delay adjusts the length of time between the INPRESS TS
measuring low pressure and sounding the alarm. Low pressure can
occur when a door or window is opened momentarily, not requiring
alarm to sound.
Enter Setup Mode and select ALARM SETTING button. Use the
onscreen ADJUST buttons to change the corresponding fields. Press
to toggle through Disabled / 1 – 10 minutes. When set correctly, press
the SAVE button.
CHANGE SERVICE REMINDERS
Start Up Screen > Main Screen > Settings Button > Settings Screen >
Site Access Button > Check Runtime.
Enter Setup mode and select CHECK RUNTIME button. Use the
onscreen UP and DOWN buttons to change the service interval
setpoint.
To reset current runtime back to zero, press RESET CURRENT
RUNTIME button and enter site access pin.
Change Alarm Delay Settings
Change Service Reminder
