Breas Vivo 3 Скачать руководство пользователя страница 9

Страница: 9 / 143

Introduction

WARNING!

Risk of Personal Injury

The Vivo 3 must only be used:

•

For the intended treatment in accordance with this operating manual and with the
instructions given by the responsible clinical personnel.

•

In accordance with the operating conditions specified in this operating manual.

•

In original and unmodified shape and only with accessories specified or approved
by Breas Medical.

Every other use may lead to risk of personal injury!

CAUTION!

Read this Clinician

’

s manual thoroughly so that you completely understand how the

Vivo 3 is operated and maintained before taking it into use, to ensure correct usage,
maximum performance and serviceability.
Non-professional caregivers (e.g. family members) should consult the medical equip-
ment provider

’

s respiratory therapist if they have any questions about the function,

proper use, operation, service or maintenance of the Vivo 3.

WARNING!

The Vivo 3 is not designed for life support treatment:

•

The Vivo 3 should not be used for life support treatment.

•

The Vivo 3 shall only be used by patients with spontaneous breathing.

•

The Vivo 3 should not be used for ventilator dependent patients.

Introduction 9

Doc. 007232 Y-2

Vivo 3 Clinician

’

s Manual

Содержание Vivo 3
















































































































































Результаты поиска

Содержание Vivo 3

Отзывы:

Похожие инструкции для Vivo 3

Бренды по названию

Популярные бренды

Breas Vivo 3, Руководство для клиницистов

Результаты поиска

Содержание Vivo 3

Отзывы:

Похожие инструкции для Vivo 3

Бренды по названию

Популярные бренды