Breas Vivo 3, Руководство для клиницистов

Страница: 82 / 143

CAUTION!
•
When using the Vivo 3 with the SpO2 sensor, the Vivo 3
displays functional oxygen saturation measured by the sensor.
•
The following information concerns the light emitted by the SpO2
–
Peak Wavelength (red): 660 nm
–
Peak Wavelength (infrared): 905 nm
–
Maximum Optical Output Power:
≤
15 mW
–
For more information regarding the oxygen probe
’
s range of peak wave-
lengths, max optical power and usage, please refer to the respective probe
manual.
•
Environmental factors may influence the function or accuracy of the pulse oxi-
meter, such as ambient light, physical movement, diagnostic testing, low perfusion,
electromagnetic interference, dysfunctional haemoglobin, presence of certain dyes
and inappropriate positioning of the pulse oximeter probe.
•
A functional test cannot be used to assess the accuracy of a pulse oximeter probe
or a pulse oximeter.
6.7.4 Using the Oxygen Supply Adapter
WARNING!
Read the section 2.9 Oxygen Usage
—
Warning and Precautions , page 28 before using the
Vivo 3 with oxygen.
Supplemental oxygen with a flow up to 30 l/min can be added by an oxygen source
with rotameter such as oxygen cylinder, central oxygen supply system or an oxygen
concentrator.
82 How to Use the Vivo 3
Vivo 3 Clinician
’
s Manual
Doc. 007232 Y-2