BRAYER BR4950, Инструкция по эксплуатации

Страница: 8 / 40

8 EN
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Insert the power cord plug into the mains socket, you
will hear a sound signal.
Switching the fan on/off and selecting the airflow
speed
Notes:
- the buttons on the control panel (5) are sensory,
you just need to touch the button to switch the
necessary operation mode on;
- each pressing of buttons on the control panel (5)
or on the remote control (20) is accompanied with
a sound signal;
- if no buttons are pressed, then the display (3)
illumination will go out after 3 minutes.
• To switch the fan on, press the button (7) «ON/OFF»
on the control panel (5) or the button (21) « » on
the remote control (20), you will hear a sound signal,
and the fan will switch on at low airflow speed, the
symbol (12) « » will light up on the display (3).
• The digital symbols (19) on the display (3) will show
the air temperature in the room and the symbol (16)
« ».
Note: the temperature digital indications (19) may
be slightly different from the readings of another
thermometer.
• Pressing the button (8) «SPEED» on the control panel
(5) or the button (23) «SPEED» on the remote control
(20) you can select the airflow speed, the symbols (12)
«
, , » will appear on the display.
• To switch the fan off, press the button (7) «ON/OFF»
on the control panel or the button (21) « » on the
remote control (20). The fan will be switched off and
the display (3) will go out.
Fan operation time timer
• To set the operating time of the fan, press the button
(9) «TIMER» on the control panel (5) or the button
(27) «TIMER» on the remote control (20), you will hear
a sound signal and the digital symbols (19 ) on the
display (3) will show the timer operation time «0 0» and
the symbol (17) « » will appear.
• Press again the buttons (9 or 27) to set the timer
operation time. Timer operation time can be set from 1
hour to 15 hours with 1 hour setting step.
• To switch the timer off, press the button (9 or 27)
repeatedly until the digital symbols (19) on the display
(3) show the room temperature and the symbol (16) «
» lights up.
Switching the fan body oscillation on/off
• To switch the fan body oscillation on, press the button
(10) «OSC» on the control panel (5) or the button (25)
«OSC» on the remote control (20), the display (3) will