BRAYER BR4930, Инструкция по эксплуатации, Страница: 7 / 36

7 EN
• Keep the unit in a dry cool place out of reach of children
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR
LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power supply
voltage of the unit correspond to the specifications of
your mains. When using the unit in the mains with 60
Hz frequency, the unit does not need any additional
settings.
Preparing the filters before the using the air purifier
ATTENTION! Before removing the lid (1), make sure that
the power plug is not inserted into the mains socket.
• Place the air purifier in horizontal position.
• Remove the lid (1) by turning it to the position « »
(pic. 1).
• Remove the filter (2) from the air purifier body (5) (pic.
2).
• Unpack the filters (pic. 3).
• Install the filter (2) into the air purifier body (5) (pic. 4).
• Install the lid (1) back to its place and turn it to the
position « » (pic. 5).
• The air purifier is ready for operation.
USING THE AIR PURIFIER
• Place and use the air purifier on a flat dry and steady
surface. The distance between the unit body and other
furniture and interior objects should be at least 20 cm
and 30-50 cm above the unit.
Switching on
The control panel (4) buttons are sensory, you just
have to touch the button. Every touch of the button is
accompanied by a sound signal.
• Connect the power plug to the mains socket, you will
hear a sound signal, and the air purifier will switch on
in the standby mode.
• To switch the air purifier on, touch the on/off/operation
mode selection button (8) « » on the control panel
(4), the air purifier will switch on at low speed, and the
indicator (9) will light up.
• To switch the air purifier off, touch the on/off/operation
mode selection button (8) « » for 3-5 seconds, the air