BRAYER BR4851, Инструкция по эксплуатации

Страница: 7 / 44

7 EN
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• If foreign smell or noise appear, stop using the unit
immediately.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When the unit is
powered from the mains with 60 Hz frequency, it
does not need any additional operations.
• Wipe the fan heater body with a slightly damp cloth
and then wipe it dry.
USING THE FAN HEATER
• Place the fan heater base (1) on a flat, dry and
steady surface.
• Do not place the fan heater on soft surfaces, such as
carpets with high pile, sofas or beds.
• The distance between the front grid of the fan heater
and the furniture should be at least 1,0 m.