BRAYER BR2004, Инструкция по эксплуатации, Страница: 10 / 48

10 EN
indicator (13) « » will rotate and the preheating
time countdown will start, the digits (7) will show the
preheating time.
• In 5 minutes the preheating will stop and you will
hear 2 sound signals.
• Take the handle (3) and open the grill, carefully
put the food products on the lower frying plate. Be
careful to avoid burns by splashing fat or juice from
the products. Lower the upper part of the grill on the
products.
• After the preset time is over, you will hear 2 sound
signals which mean that the preset cooking time is
over.
• Take the handle (3) and open the grill, put the cooked
food in a suitable container using wooden or heat-
resistant plastic kitchen tools.
Note: during cooking the grill will be switching from the
heating mode to the keep warm mode, and the display
illumination color will be switching from purple to orange
(pic. 7, 8).
•
Switch the grill off by pressing and holding the
button (10) « », disconnect the power plug from
the socket, wait until the grill cools down completely.
Then open the grill and wipe the frying plates.
• Remove the tray (2) and pour the liquid out of it,
wash the tray, wipe it and install back to its place.
«Grill» operating mode
• Switch the grill on by pressing and holding the
button (10) « » for 2 seconds, press the button (12)
«Grill», only the temperature digits (8) will appear on
the display (pic. 2).
• You can set the required temperature of the heating
plates with the buttons (6) «+/-». In this mode the
operation time 1 hour is set by default. You can
switch the grill off at any moment by pressing and
holding the button (10) « ».
Keep warm mode and grill automatic switch-off
• After the cooking cycle is finished (there were 2
sound signals), the flashing time (7) and temperature
(8) digits will appear on the display. The grill will
switch to the countdown mode within 3 minutes. If
no actions are performed within 3 minutes, the keep
warm mode will switch on for 60 minutes (pic. 9).
• In 60 minutes you will hear sound signals, and the
grill will switch off in 2 seconds (pic. 10).
MALFUNCTION SYMBOLS
• In case of malfunction a sound signal will be heard,
the display illumination will glow blue, the quickly
flashing symbols «ER 1», «ER 2» or «ER 3» will be
shown the display, the buttons on the control panel
(8) will be inactive.