BRAYER BR1801, Инструкция по эксплуатации, Страница: 7 / 40

7 EN
the hand towards the infrared sensors (3), then return
the hand to its original position, the scale will switch
on, the display (4) will show the weight symbol (7)
«0», will display the symbol of weighing units (8) «g»,
also the ready-to-weigh symbol (9) « ».
MEASUREMENT UNITS SELECTION
• Switch the kitchen scale on (pic. 2).
• To select weight measurement units, place the palm
of your hand vertically as shown in the picture 3, slide
your palm up/down against the infrared sensors (3),
and the display (4) will show the following weighing
units (8) (pic. 1):
- «g» – weight of product(s) in grams;
- «oz» – weight of product(s) in ounces;
- «lb oz» – weight of product(s) in pounds and
ounces;
- «ml» – water volume in milliliters, the symbol (12)
« » will appear;
- «fl oz» – water volume in liquid pounds and
ounces, the symbol (12) « » will appear;
- «ml» – milk volume in milliliters, the symbol (13) «
» will appear;
- «fl oz» – milk volume in liquid pounds and ounces,
the symbol (13) « » will appear;
Notes:
- water can have different densities, measuring of
water volume is based on average water density
values stored in the scale memory and can differ
from the real values.
- milk has different percentages of fat, the volume of
milk is calculated based on the average fat content
stored in the scales memory, so the calculated
milk volume readings may slightly differ from the
actual values.
WEIGHT MEASUREMENT
• Switch the kitchen scale (pic. 2)on and select the
weight measurement units (pic. 3).
• If the indications on the display (4) are not zero, put
the palm of your hand to the infrared sensors (3), the
weight indications (7) will reset to «0» (pic. 5).
• Place the ingredient(s) on the weighing platform
(1) and the display (4) will show the weight of the
ingredient(s) in digital symbols (7), depending on the
selected measurement units (8).
• To weigh liquids or granular products, place a
suitable container (pic. 4) on the weighing platform
(4 1), then set the container weight to zero by putting
the palm of your hand to the infrared sensors (3) (pic.
5), the display (3 4) will show the tare symbol (8 10)
«TARE» and the weight indications (7) will reset to
«0».