BRAYER BR1251, Инструкция по эксплуатации, Страница: 11 / 52

11 EN
Attention! The blades of the chopping knife (10)
are very sharp and may be dangerous. Handle the
chopping knife (10) very carefully!
• Unplug the unit after you finish using it.
• Wash the whisk attachment (7), the chopping bowl
(9), the chopping knife (10), the cup (11) and the
cappuccinatore attachment (14) with warm water and
neutral detergent and dry them.
• Wash only the lower part of the blender attachment
(1), clean the outer surface with a slightly damp cloth.
Never immerse the blender attachment (1) into water
or any other liquids completely.
• Wipe the motor unit (2), the geared lid (8) and the
whisk attachment gear (6 and 12) with a soft slightly
damp cloth and then wipe them dry.
• After processing salty or sour products, it is
necessary to rinse the blender attachment (1) or the
chopping knife (10) with water immediately.
• While possessing products with dyeing properties
(for instance, carrot or beetroot) the attachments and
bowls can get colored, wipe the attachments and the
bowls with a cloth, dampened in vegetable oil; after
that wash the attachments and bowls with a neutral
detergent, rinse and dry them.
• Do not immerse the motor unit (2), the gear (6 and
12), the geared lid (8) into any liquids, do not wash
them under water jet or in a dishwashing machine.
• Do not use abrasives and solvents to clean the motor
unit body (2) and the removable parts.
• The cappuсcinatore attachment (14) is used only for
milk frothing.
• Before installing the attachment (14), make sure that
the power plug is not inserted into the mains socket.
• Insert the attachment (14) into the gear (6).
• Insert the gear (6) into the motor unit (2) and turn it
counterclockwise, make sure that the gear (6) and
the attachment (14) are fixed properly (pic. 6).
• Insert the power plug into the mains socket.
• Put the attachment (14) into a suitable container with
cold milk or cream. You can put the foodstuffs into
the cup (11).
• To switch on, press and hold down the button (4).
• When you press and hold the button (4) you can
control the whisk attachment rotation speed by
turning the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the (3) “TURBO” button.
• Release the button (3 or 4) to switch off.
• After you finish using the unit, disconnect the power
plug from the mains socket, disconnect the gear
(6) from the motor unit (2) by turning the gear (6)
clockwise.
• Remove the cappuccinatore attachment (14) from
the gear (6).
Notes: you can store the processed products in the cup
(11) covering it with the lid (pic. 7).
CLEANING