BRAYER BR1035, Инструкция по эксплуатации

Страница: 9 / 40

9 EN
(14) will stop flashing and will be on constantly, and
the digital symbols (13) will show the temperature of
the water in the flask (1) of the kettle.
• If it is necessary to switch the heating function off, press
the keep warm mode (15) « » On/Off button.
Note: if you remove the kettle from the base for the time
less than 1 minute, the keep warm mode will stay on.
• If you accidentally switched the kettle on, but the water
level appeared to be below the minimal mark, the
automatic thermal switch will be on and the kettle will
switch off. In this case take the kettle from the base (7)
and let it cool down for 10-15 minutes, then fill the kettle
with water and switch it on, the electric kettle will operate
in normal mode.
CLEANING AND MAINTENANCE
• Before cleaning disconnect the kettle from the mains,
pour out water and let the kettle cool down.
• Wipe the base (4) and the outer surface of the flask (5)
with a slightly damp cloth, and then wipe the base (4)
and the flask (5) dry. Use soft detergents to remove dirt;
do not use metal sponges and abrasive detergents and
solvents.
• Do not immerse the kettle, the kettle stand (7), power
cord and power cord plug in water or any other liquid, do
not wash the kettle in the dishwasher.
DESCALING
• Scale, appearing inside the flask (1), influences the water
taste and disturbs the heat exchange between water and
the heating element and also creates a risk of failure of
the heating element, the burnout of the heating element
because of large amount of scale in the flask (1) is not
covered by warranty.
• To remove scale, you can use special scale-removing
agents, as well as household ones, for example, vinegar
or citric acid.
• Dissolve 25 g of citric acid in 500 ml of hot water, add
water up to the maximum volume of water in the kettle.
• Pour the resulting solution into the kettle and leave for it
15-30 minutes. If necessary, you can turn on the water
boiling mode.
• Pour out the liquid and rinse the flask (5) several times,
boil water several times.
• You can use special detergents for electric kettles or
coffee machines to remove scale, strictly following the
instructions on their usage which should be placed on
the packing of the detergent or in supplemental materials
provided by the seller.
• Clean the kettle from scale regularly.
STORAGE
• Before taking the kettle away for long storage, unplug it,
pour out water and let the unit cool down.
• Clean the base (4) and the flask (5).