BRAYER BR1004, Инструкция по эксплуатации

Страница: 4 / 29

6 7 en en
• do not switch the kettle on without water, after the
kettle is filled, close the lid tightly.
• ensure that the water level is not above the maximal
mark «MAX». If the water level exceeds the maximal
mark, boiling water can splash out of the kettle during
boiling.
• To avoid burns by hot steam, do not bend over the
kettle spout.
• do not open the kettle lid while water boiling.
• The surface of the kettle may have rather high
temperature. Be cautious and careful when in contact
with heated surfaces of the kettle. Take the kettle by
the handle.
• Be careful while carrying the kettle filled with boiling
water. Be careful when you pour water out of the
kettle, do not tilt the kettle sharply, in case of careless
use of the kettle, you can get burns by hot water.
• Unplug the kettle before cleaning or when you are
not using it. When unplugging the kettle hold only
the power cord plug and carefully remove it from the
mains socket, do not pull the power cord — this can
lead to damage of the power cord or the socket or
cause short circuit.
• To avoid electric shock do not immerse the electric
kettle into water or any other liquids.
• do not wash the electric kettle in a dishwashing
machine.
• For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
ATTENTION!
do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The electric kettle is not intended for usage by
children.
• do not leave children unattended to prevent using
the unit as a toy.
• do not allow children to touch the unit and the power
cord during the electric kettle operation.
• Place the unit out of reach of children during the
operation and cooling down.
• This unit is not intended for usage by physically or
mentally disabled persons (including children) or
• by persons lacking experience or knowledge if
they are not under supervision of a person who
is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
• Check the integrity of the power cord, the power plug
and the kettle body periodically.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• do not repair the unit by yourself. do not
disassemble the unit by yourself, if any malfunction
is detected, and after it was dropped, unplug the unit
and apply to the service center.
• Transport the kettle in the original package.
• keep the unit out of reach of children and disabled
• persons.
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR
INDUSTRIAL OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• examine the kettle for damages, in case of damage
do not plug it into the mains.
• Make sure that the specifications of power supply
voltage specified on the lower panel of the unit or
the base correspond to the specifications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
measures.
• Wipe the outer surface of the base (4) and the flask
(5) with a clean, slightly damp cloth to remove dust.
• Place the base (4) of the kettle on a solid steady
flat and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures — this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Remove the lid (9), remove the tea infuser taking it
by the handle (7), wash the kettle flask (5) and the
infuser with neutral detergent, rinse and dry. Wipe
the outer surface of the flask (5) with a slightly damp
cloth and then wipe it dry. do not use abrasives or
coarse scourers for this.
• Before connecting the kettle, make sure that there
are no moisture drops on the flask (5), the base (4),
the power cord (12) and the power plug.
• To fill the kettle with water take it off the base (4),
remove the lid (9) and remove the tea infuser.
• Fill the kettle with water up to the mark «MAX» on the
water level scale (6).
• Insert the tea infuser, close the lid (9), make sure that
the lid (9) is closed tightly.
• Set the kettle filled with water on the base (4).
• Note: — you can boil water both with the tea infuser
installed and without it.
• Connect the powerr plug (12) to the mains socket,
you will hear a sound signal and the on/off button
illumination will glow green.