GB
version
1.0
E
Copyright Bravilor Bonamat B.V.
21
7.2.3
Starting descaling
programme
coffee–making system
– Make sure that the spray head is in the
correct position above the
empty
container
with
empty
filter unit.
– Desolve 100 g of descaler in 0.75 litre
lukewarm water (about 40
°
C). Stir the
descaling solution, so that it is well desolved.
– When during the descaling programme a
signal sounds, an operation is to be carried
out. Finish the operation by pressing the
confirmation key (L.).
– When the level blocks on the display start
flashing, the coffee container is to be
emptied.
G
H
I
J
K
L
M
N
Fig. 18 Starting the descaling programme
coffee–making system
D
After having entered the operators’ PIN code,
press selection key (M.)
⇓
twice.
– The descaling programme appears on the
display (fig.18 ).
D
Press programming key (G.).
– The symbol
dP
starts flashing and the enter
symbol
↵
appears on the display.
D
Press confirmation key (L.) to start the
descaling programme.
– A flashing hammer symbol appears on the
display.
– The waterreservoir is boiled empty and this
water flows into the coffee container.
– A signal sounds and the level blocks on the
display flash, indicating that the container
must be emptied.
TIP
–
Stopping the programme
Within 5 seconds (when the stop symbol
above key (K.) still flashes):
D
press key (K.).
–
After 5 seconds (when the stop symbol key
above key (K.) has stopped flashing):
D
Hold programming key (G.) down until
fig. 18 re–appears on the display.
– The programme can still be left by pressing
the red stop key.
– After pouring in the descaler solution this is
no longer possible!
D
Empty the coffee container through the tap (AB.).
D
Press the confirmation key (L.) to confirm that
the container is empty.
– A flashing hammer symbol appears on the
display.
– The waterreservoir is boiled empty and this
water flows into the coffee container.
– A signal sounds and the level blocks on the
display flash, indicating that the container
must be emptied.
D
Empty the coffee container through the tap (AB.).
D
Press the confirmation key (L.) to confirm that
the container is empty.
– A signal sounds, the hammer symbol flashes
and a funnel appears on the display (fig.19 ).
G
H
I
J
K
L
M
N
Fig. 19 Coffee–making system asks for descaling
solution
D
Remove the plug of the filling hole for descaler
solution (B.).
– The filling hole of the coffee–making system
is found behind the spray head (D.).
D
Place the special funnel in the filling hole and
carefully pour the descaler solution into the
filling hole.
