BRPRC108HE, REV B
8
REV 3/20
C.
INSTALLATION OF TONGUE ASSEMBLY
1. The tongue can be installed either on the left or right carrier arm assembly depending on how
the tow-behind mower will be towed.
See figure 5.
Secure the hitch pivot on the chosen
carrier arm assembly with the 1/2” x 3-1/2” hex head bolt, lock washer, and nut provided.
2. Install the tongue into the hitch pivot and secure by placing the provided 5/16” wire lock pins on
each side of the hitch pivot.
Note:
To help prevent any unwanted pin removal caused by oncoming debris install the 5/16”
wire lock pins with the wire lock section back from the direction of travel.
See Figure 6.
Figure 5: Assembly of the Tongue and Hitch Pivot
Hitch Pivot – Attach to
Either Left or Right
Carrier Arm Assy.
Tongue
Carrier Arm
Assy.
Direct Behind Position
Offset Position
Содержание BRPRC108HEB
Страница 21: ...BRPRC108HE REV B 21 REV 3 20 ...
Страница 22: ...BRPRC108HE REV B 22 REV 3 20 PAGE INTENTIONALLLY LEFT BLANK ...
Страница 23: ...BRPRC108HE REV B 23 REV 3 20 ...
