Fitting Heavy Duty Rail
Fit and use
1.
Available in 3.95, 4.50, 4.9 and 5.5 metre lengths, this rail profile can be installed with a maximum unsupported
span of 600 mm under normal conditions.
2.
Additional fasteners must be fitted at the ends of the rail, in particular at the rear end.
3. Fasteners must be used on installation
4.
Bolts:- M8 steel, hexagon headed grade 8.8, plated, guide length 40 - 50 mm.
5.
Nuts:- M8 steel, nyloc, grade 8, plated.
6.
Washers:- M8 steel, plain, plated.
7.
Torque settings:- 20 nm (15 lbs/ft).
8.
Under Floor Reinforcement
9.
Contact BraunAbility for specific recommendations.
8
Rails
