Fitting Low Profile Rail
Fit and use
1.
Standard low profile rail is produced in a 3.66 metre lengths.
2. There are 145 x 20 mm “scallops” in the top face and the base has 37 x M8 countersunk holes at 101.6 mm pitch for
the fasteners.
3.
As an option the rail can be supplied without the base holes machined. In this case the machinist must ensure the
hole pitches are as recommended, and the countersunk depths are critically controlled to avoid weakening the rail.
4.
All fasteners must be torque loaded to 11 Nm (8 foot pounds).
5.
Specific end caps are available for low profile rail.
6.
Low profile rail is also available in 4.50 and 5 metre length.
5
Rails
EN
Fi
t a
n
d u
se
