background image

Page 31

Braun

®

 Limited Warranty

WARRANTY COVERAGE AND WARRANTY COVERAGE TIME PERIODS

The Braun Corporation (“Braun”) warranty covers certain parts of this wheelchair lift for three (3) years or 
10,000 cycles and the cost of labor to repair or replace those parts for one (1) year or 3,000 cycles.  This 
limited warranty covers substantial defects in materials and workmanship of the lift, provided that the lift is 
operated and maintained properly and in conformity with the owner’s manual.  The warranty period begins 
on the date that the product is delivered to the 

fi

rst retail purchaser by an independent, authorized dealer 

of Braun, or, if the dealer places the product into any type of service prior to retail sale, on the date the 
dealer 

fi

rst places the product in such service.  This limited warranty applies only to the 

fi

rst purchaser.  It 

may not be transferred.

WHAT BRAUN WILL DO TO CORRECT PROBLEMS

In the event that a substantial defect in material or workmanship, attributable to Braun, is found to exist 
during the 

fi

rst year of warranty coverage, it will be repaired or replaced, at Braun’s option, without charge 

for parts or labor to the owner, in accordance with the terms, conditions and limitations of this limited war-
ranty.  If the substantial defect in material or workmanship, attributable to Braun, is found to exist during 
the second or third year of warranty coverage, it will be repaired or replaced, at Braun’s option, without 
charge to the owner for parts, only, in accordance with the terms, conditions and limitations of this limited 
warranty.  The cost of labor for any repair or replacement in the second and third year of warranty cover-
age is the sole responsibility of the owner.  This warranty does not cover labor costs in the second or third 
year of coverage.

Braun’s obligation to repair or replace defective materials or workmanship is the sole obligation of Braun 
under this limited warranty. Braun reserves the right to use new or remanufactured parts of similar quality 
to complete any work, and to make parts and design changes from time to time without notice to anyone.  
Braun reserves the right to make changes in the design or material of its products without incurring any 
obligation to incorporate such changes in any previously manufactured product.  Braun makes no war-
ranty as to the future performance of this product, and this limited warranty is not intended to extend to 
the future performance of the product.  In addition, the owner’s obligation to notify Braun, or one of its 
authorized, independent dealers, of a claimed defect does not modify any obligation placed on the owner 
to contact Braun directly when attempting to pursue remedies under state or federal law.

LIMITATIONS, EXCLUSIONS AND DISCLAIMER OF IMPLIED WARRANTIES

ANY IMPLIED WARRANTY THAT IS FOUND TO ARISE BY WAY OF STATE OR FEDERAL LAW, 
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF 
FITNESS, IS LIMITED IN DURATION TO THE TERMS OF THIS LIMITED WARRANTY AND IS LIM-
ITED IN SCOPE OF COVERAGE TO THE SCOPE OF COVERAGE OF THIS LIMITED WARRANTY.

  

Braun disclaims any express or implied warranty, including any implied warranty of 

fi

tness or merchant-

ability, on items excluded from coverage as set forth in this limited warranty.  Braun makes no warranty 
of any nature beyond that contained in this limited warranty.  No one has authority to enlarge, amend or 
modify this limited warranty, and Braun does not authorize anyone to create any other obligation for it 
regarding this product.  Braun is not responsible for any representation, promise or warranty made by any 
independent dealer or other person beyond what is expressly stated in this limited warranty.  Any selling 
or servicing dealer is not Braun’s agent, but an independent entity.

BRAUN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT 
MAY RESULT FROM BREACH OF THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY.  THIS 
EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES SHALL BE INDEPENDENT OF 
ANY FAILURE OF THE ESSENTIAL PURPOSE OF ANY WARRANTY, AND THIS EXCLUSION SHALL 
SURVIVE ANY DETERMINATION THAT THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY 
HAS FAILED OF ITS ESSENTIAL PURPOSE.

Содержание Under-Vehicle Lift NUVL603C







































Отзывы: