10
•
If
Bluetooth
wireless technology is acti-
vated on your handle, the
Bluetooth
sym-
bol on the radio transmission display (7)
illuminates. Once the handle is paired, the
Smart Ring (2) flashes briefly.
•
Keep your smartphone in close proximity
(within 5m distance) when using it with the
handle. Make sure the smartphone is
safely positioned in a dry place.
•
The smartphone holder stand (15)
(depending on model) can hold your
smartphone while using. Before use,
make sure your phone fits the stand and
keeps stable (picture D).
Note: Your smartphone must support
Bluetooth
4.0 (or higher)/
Bluetooth
Smart in
order to pair your handle. Compatible smart-
phones are listed in App Store
(SM)
or Google
Play™.
Caution: Follow your smartphone’s user
manual to ensure your phone/charger is
designed for use in a bathroom environment.
Check www.oralbappavailability.co.uk for
country availability of the Oral-B
TM
App.
Cleaning recommen-
dations
After brushing, rinse your brush head under
running water with the handle switched on.
Switch off and remove the brush head. Clean
handle and brush head separately; wipe
them dry before reassembling. Unplug the
charger before cleaning. Brush head holder
(10), brush head compartment and protec-
tive cover (11) and smartphone holder stand
(15) are dishwasher-safe.
To be cleaned with a damp cloth only:
charger (9), charger pouch (18), charging
travel case (12), basic travel case (17),
smart plug (13), smartphone holder (14)
(picture
5
).
Accessories
(depending on model)
Smartphone Holder
•
Before each use, make sure mirror, suction
cup surface (14d) and holding brackets
(14a) are always clean and dry (picture C1).
Use a fuzz-free cloth for cleaning suction
cup surface and mirror. In particular make
sure suction cup surface and
mirror are free from any contamination
(e.g. hair, dust, oil, fuzz, dirt etc.).
•
Press your smartphone holder (14) just
with enough pressure, centered at nose
level on a sturdy mirror. Then mount the
holder by pressing the lever arm (14b)
towards the mirror until it snaps in (picture
C2).
Note: Only affix on mirror to ensure safe
and correct conditions. For use in bath-
room only. Do not use in automobiles.
•
Always make sure the smartphone holder
is securely mounted on the mirror before
inserting your smartphone. Place your
smartphone (portrait) sideways in between
the holding brackets (14a) by pressing
against one bracket with your phone and
sliding the other bracket to the side
(picture C3). Follow the same procedure
to remove your phone again.
•
Adjust the overall position for the required
angle by moving the ball joint of the holder
(picture C4).
•
Once done, remove your phone from the
holder. Take off the smartphone holder by
flipping the lever arm back and pulling the
tab carefully (picture C5 1./2.). Affix smart-
phone holder with each use again.
•
The smartphone holder should be cleaned
with a damp fuzz-free cloth only (picture
5
).
You may use glass cleaner, alcohol or simi-
lar products (avoid products with silicone
oil). Make sure the surface is dry and dust
free after cleaning. Store in clean and dry
place. If not in use, always remove your
smartphone from the holder.
Note: Smartphone width required for usage:
minimum 58mm, maximum 83mm.
Caution: Small parts may come off, keep out
of reach of children.
Follow your smartphone’s user manual to
ensure your phone/charger is designed for
use in a bathroom environment.
Charging Travel Case
•
To charge your handle (5) place it on the
pin in the charging travel case (12) and
connect it to an electric outlet, using the
extra smart plug (13) provided. The smart
plug may be used for all global mains
voltage ranges (100 -240V).
91608342_D701_TR_EE_AP.indd 10
91608342_D701_TR_EE_AP.indd 10
21.03.18 14:13
21.03.18 14:13
Business Use - P&G AUTHORIZED POA-00038141 Rev 001 Effective Date 2018-03-26 Printed 2018-07-25 Page 10 of 116
