7
One handed operation: the Smartspeed switch (3) allows you
to turn on the appliance and control the speed with one hand.
Operating your Hand Blender
First use: Remove the transportation lock from the motor part
(4) by pulling it at the red strap.
Switching On (A)
The appliance comes equipped with a safety button for
releasing the Smartspeed switch. To safely turn it on, follow
these points:
•
Press the safety button (1) with your thumb. The Pilot Light
will turn solid green.
•
Immediately press the Smartspeed switch and adjust to the
desired speed.
NOTE: If the Smartspeed switch is not pressed within
2 seconds, the appliance cannot be switched on for safety
reasons. The pilot light will flash red. To switch the
appliance on, start again with first step.
•
During operation you do not need to keep the safety button
pressed.
Blending Shaft (B)
The hand blender is perfectly suited for preparing dips,
sauces, soups, mayonnaise and baby food as well as for
mixing drinks and milk shakes. For best blending results use
highest speed.
Assembly and Operation
•
Attach the blending shaft (6) to the motor part until it clicks.
•
Place the blending shaft into the mixture to be blended.
Then switch the appliance on.
•
Blend ingredients to the desired consistency using a gentle
up-and-down motion.
•
After use, unplug the hand blender and press
the EasyClick release buttons (5) to detach the blending
shaft.
Caution
•
If using the appliance to purée hot food in a saucepan or
pot, remove the saucepan or pot from the heat source and
ensure the liquid is not boiling. Allow hot food to cool
slightly to avoid risk of scalding.
•
Do not let the hand blender sit in a hot pan on the cooktop
when not in use.
Recipe Example: Mayonnaise
250 g oil (e.g. sunflower oil)
1 egg and 1 extra egg yolk
1–2 tbsp. vinegar
Salt and pepper to taste
•
Place all ingredients (at room temperature) into the beaker
in the order as above.
•
Place the hand blender at the bottom of the beaker. Blend
at maximum speed until the oil starts emulsifying.
•
With the hand blender still running, slowly raise the shaft to
the top of the mixture and back down to incorporate the rest
of the oil.
NOTE: Processing time: approx. 1 minute for salads and up
to 2 minutes for a thicker mayonnaise (e.g. for dip).
Whisk Accessory (B)
Use the whisk only for whipping cream, beating egg whites,
making sponge cakes and ready-mix desserts.
Assembly and Operation
•
Attach the whisk (8b) to the gearbox (8a).
•
Align the motor part with the assembled whisk accessory
and push the pieces together until they click.
•
After use, unplug and press the EasyClick release buttons
to detach the motor part. Then pull the whisk out of the
gearbox.
Tips for Best Results
•
Move the whisk clockwise while holding it at a slight incline.
•
To prevent splattering, start slowly and use the whisk
accessory in deep containers or pans.
•
Place the whisk in a bowl and only then switch the appliance
on.
•
Always ensure the whisk and mixing bowl are completely
clean and free of fat before whisking egg whites. Only whip
up to 4 egg whites.
Recipe Example: Whipped Cream
400 ml chilled cream (min. 30% fat content,
4 - 8 °C)
•
Start with low speed (light pressure on the switch) and
increase the speed (more pressure on switch) while
whipping.
•
Always use fresh chilled cream to achieve greater and more
stable volume when whisking.
Puree Accessory (C)
The puree accessory can be used to mash cooked vegetables
and fruits such as potatoes, sweet potatoes, tomatoes, plums
and apples.
Before Use
•
Do not mash hard or uncooked food, as this may damage
the unit.
•
Peel and remove any stones or hard parts; cook and drain
then mash the fruit/vegetable.
Assembly and Operation
•
Fit the gearbox (9a) to the shaft (9b) by turning in a
clockwise direction until it locks into place.
•
Turn the puree accessory upside down and fit the paddle
(9c) over the central hub and turn counter- clockwise to
locate. (If the gearbox is not fitted properly, then the paddle
will not secure in place).
•
Align the assembled puree accessory with the motor body
part and click the two parts together. Plug in.
•
Dip the puree accessory into the ingredients and switch on
the appliance.
•
Using a gentle up and down motion, move the puree
accessory through the ingredients until the desired texture
is achieved.
•
Release the Smartspeed switch and ensure the puree
accessory has completely stopped turning before removing
it from the food.
•
After use, unplug the appliance. Remove the paddle (9c) by
turning clockwise.
•
Press the EasyClick release buttons to detach the puree
accessory from the motor part. Separate the gearbox from
the shaft by turning counter-clockwise.
Caution
•
Never use the puree accessory in a saucepan over direct
heat.
•
Always remove the saucepan from the heat and allow to
cool slightly.
•
Sit the saucepan or bowl on a stable, flat surface, and
support it with your free hand.
•
Do not tap the puree accessory on the side of the cooking
vessel during or after use. Use a spatula to scrape excess
food away.
•
For best results when mashing never fill a saucepan or bowl
more than half full with food.
•
Do not process more than one batch without interruption.
•
Let the appliance cool down for 4 minutes before you
continue processing.
5722113674_MQ787_China_S6-16.indd 7
21.05.19 10:42
Содержание MultiQuick 7 MQ787
