13
•
Important:
Keep all packaging (plastic bags,
polystyrene foam) away from children.
Description
Steam Generator Iron
1 Display
2 On/Off button
3 Calc clean system button
4 Settings (eco, iCare, turbo)
5 Iron rest
6 Water tank
7 Power cord
8 Closure
9 Transparent cover
10 Lock system
Iron
11 Temperature control LED
12 Steam button
13 Precision shot button
14 Double cord
15 Heel rest
Intended use
The appliance must be used only for ironing
garments which are suitable for ironing according to
the care label. In addition the appliance can be used
for refreshing. Never iron or dampen garments
while wearing them.
Before fi rst use
Take the unit out of the carton. Remove all pieces of
the packing. Remove any possibly extant labels on
the unit (do not remove the rating plate).
When steam is ready for the fi rst time we
recommend to iron for a few minutes over a rag
to avoid manufacturing residues can dirty your
garments.
(A) Filling the water tank
•
Make sure that the appliance is switched off and
the system is unplugged.
•
Remove the water tank (6).
•
Fill the water tank with tap water, taking care
not to exceed the “max” level but at least up
to the mark “min” otherwise the appliance will
not be ready to start steam ironing. If you have
extremely hard water, we recommend that
you use a mixture of 50 % tap water and 50 %
distilled water.
•
Never use distilled water exclusively. Do not
add any additives (e.g. starch). Do not use
condensation water from a tumble dryer.
•
Insert the water tank.
•
Place the appliance on a stable, level surface.
Note:
If you use fi ltering devices or in-house
permanent descaler, make absolutely sure the
water obtained is neutral ph.
Water reserve function
•
When the water level is becoming low, the icon
starts fl ashing. At this stage it is possible to
continue steam ironing for about 10-15 minutes.
•
When the icon turns permanently on, it
becomes necessary to refi ll the tank. At the same
time, the temperature control LED (11) is fl ashing
and the icon related to the selected setting (4)
turns off .
•
To continue steam ironing, refi ll the water tank (A).
(B) Start into operation
Before start ironing follow the garment care label
instructions carefully. Fabrics with this symbol
are not ironable.
•
Place the iron on the iron rest (5) or on its heel
rest (15), unwind completely the cord, plug in the
appliance and press the On/ Off button (2).
•
Select the setting (4) most suitable for the
garments to be ironed.
•
The requested setting can be chosen by pressing
the corresponding button (eco, iCare or turbo).
To switch from one setting to another press the
dedicated button.
•
The iron will start to heat up and the temperature
control LED (11) on the iron will fl ash. Once the
temperature is reached, the temperature control
LED is permanently on.
•
The related icon for the setting in the display (1)
will start to fl ash. When steam is ready the icon
turns permanently on.
Steam ironing
Press the steam button (12) or the precision shot
button (13).
Double trigger
Press the steam button (12) or the precision shot
button (13) twice in quick succession within 1 second.
There will be a continuous steam emission for a few
seconds.
Press the steam button or the precision shot button
once again during steam emission to stop the
function.
Dry ironing
Iron without pressing the steam button (12) or the
precision shot button (13). Please note that after
5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd 13
5712811931_CareStyle_7143_7144_7155_7156_INT_S6-152.indd 13
27.10.17 08:22
27.10.17 08:22
