Braun BUA5000AR, Руководство пользователя

Страница: 8 / 26

6
Memory function
Your ExactFit™ 1 blood pressure monitor will automatically store the
latest measurement . Storing is done automatically after the completed
measurement .
To recall the reading, press and hold the power button for at least
2 seconds while the unit is switched off . When all the display elements
are shown, release the power button and the screen will show the last
reading with an symbol .
Battery charge indicator
Batteries almost discharged
When the batteries are approximately 75%
used, a battery warning appears . This icon
blinks 3 times first when the device is turned
on, then goes to measuring mode . The
monitor will continue to measure reliably, but
new batteries should be obtained .
Batteries discharged—replacements required
When the batteries are fully discharged,
the battery symbol will flash empty along
with 3 short beep sounds as soon as the
device is switched on . You cannot take any
further measurement and must replace
the batteries . Refer to the section called
“Inserting batteries” .
Storage and cleaning
• Do not expose device to either extreme
temperatures, humidity, dust or direct
sunlight .
•
The cuff contains a sensitive air-tight
inflatable bladder . Handle this carefully
and avoid all types of straining through
twisting or buckling .
•
Clean the product with a soft, slightly
damp cloth . Stains on the cuff can be
carefully removed with a damp cloth . Do
not use gasoline, thinners or similar
solvents . Do not wash or dry clean the
cuff . Do not store the product in a place
exposed to direct sunlight or high
humidity .
• Do not drop the device or treat it roughly
in any way . Avoid strong vibrations .
!