Braun BP 6200, Инструкция по эксплуатации

Страница: 6 / 15

10 11
Irregular heart beat detector
The appearance of this symbol
signifies that a certain pulse irregularity was detected during the
measurement. Talking, moving, shaking or an irregular pulse during the measurement can result in the
appearance of this icon. Usually this is not a cause for concern, however if the symbol appears often,
we recommend you seek medical advice. The device does not replace a cardiac examination, but serve
to detect pulse irregularities at an early stage.
Low battery indicator
When the low battery indicator flashes on the display, it means the battery is low and the four
batteries need to be replaced with alkaline LR6 (AA) batteries.
** After replacing batteries, BPM will go into time-setting mode automatically and show the
last measurement time on screen. Please set the current date / time before taking the next
measurement to get correct average result.
Storage and cleaning
• Always keep the unit in the carrying case after its use.
• Do not put the item directly under the sunlight, in high temperature or humid and dusty places.
• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.
• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece of dry
cloth to wipe it dry. Use a piece of dry cloth to wipe the cuff when it is dirty.
• Do not use any strong cleansers to clean it.
• When the unit is not to be used for a long time, remove the batteries.
(Batteries may leak or cause harm).
• Do not modify the device. NEVER open the device! This will make the manufacturer’s warranty
invalid.
Calibration
This device was designed and manufactured for a long service life, however it is generally
recommended to have the device inspected once a year to ensure correct function and accuracy.
Please contact the authorized service centre located in your country. Note: The calibration checking
is not a free service. Please contact the Authorized Service Centre to get a quotation before you send
out the product.
This device is not intended as a substitute for regular check-ups by your doctor, please continue to
visit your doctor on a regular basis for a professional reading.
Production date is given by the LOT located in the back of the device. The first 3 numeric digits
after the LOT No represents the day of the year of manufacture. The next 2 numeric digits represent
the last two numbers of the calendar year of manufacture and the letters at the end designate the
manufacturer of the product. E.g. LOT 15614VTN this product was made on the day 156, year 2014 at
manufacturer identifier VTN.
What to do if …..
Problem Reason Solution
Heart rate
symbol
Appears in the measurement
condition and flashes when
pulse is detected.
• Measurement in progress, remain quiet.
Low battery
indicator
Appears when the battery
voltage is excessively low or the
positions of the batteries are
incorrect.
• Replace all four batteries with new ones.
Insert the batteries in the correct
positions. Be aware of +/- positions.
Measuring
error
Appears when the accurate
blood pressure and pulse could
not be obtained.
• Press “start/stop” button again and remeasure.
• Check if cuff is wrapped according to instructions.
• Check that there are no kinks in tube.
• Check palm if exerting effort.
• Check if talking or moving during measurement.
• Check if posture is correct.
E1 shows The cuff is not secure • Refasten the cuff and then measure again.
E2 shows The cuff is very tight • Refasten the cuff and then measure again.
E10 or
E11 shows The monitor detected motion,
talking or the pulse is too poor
while measuring.
• Relax for a moment and then measure again.
E20 shows The measurement process does
not detect the pulse signal.
• Loosen the clothing on the arm and then
measure again.
E21 shows Measure incorrectly • Relax for a moment and then measure again.
EE3 - EE15
shows
Error while measuring • Retake the measurement. If the problem
persists, contact the retailer or our customer
service department for further assistance.
Refer to the warranty in page13 for contact
information and return instructions.