Braun 12830020, Руководство пользователя

Страница: 12 / 16

12
English
Before use
Please read instructions carefully and
completely before using the appliance.
Description
1 On/Off button
2
Clean system LED
3 Clean button
4 Mode button
5 Eco mode indicator
6 iCare mode indicator
7 Turbo button
8 Turbo mode indicator +
9 Iron rest
10 Lock system
11 Removable water tank
12 Power cord/Storage
13 Steam button
14 Temperature control LED
15 Heel rest
16 Cleaning vessel
17 Double cord/Storage
Intended use
The appliance must be used only for ironing
garments which are suitable for ironing according
to the care label. Never iron or dampen garments
while wearing them.
Filling the water tank
(for details refer to fi g. A)
Make sure the appliance is plugged off . You can
refi ll the water tank at any time during use.
This appliance has been designed to be used with
tap water. However, if you live in an area with hard
water, we recommend that you use either distilled
water or demineralized water to prolong the lifetime
of the appliance. Do not use condensation water
from a tumble dryer.
Start into Operation
(for details refer to fi g. B)
Before start ironing follow the garment care label
instructions carefully. Fabrics with this symbol
are not ironable.
For best ironing results, after ironing with steam,
perform the last strokes without steam.
Before First use
(for details refer to fi g. B)
When steam is ready for the fi rst time we
recommend to iron for a few minutes over a rag
to avoid manufacturing residues can dirty your
garments.
Settings
(for details refer to fi g. C)
iCare
The iCare mode is automatically chosen when
the appliance is switched on. It is suggested for
garments like wool, polyester and cotton/linen.
eco
It is suggested for most delicate garments like
synthetics, silk and blended fabrics. This mode
allows less power consumption.
turbo + (max. steam)
It is suggested for garments that need more
powerful steam, like thick cotton/linen and jeans.
Note: The pump is activated each time you press
the steam button. It produces some subtle rattling
noise which might change from setting to setting.
This is normal.
Iron Auto-Off
(for details refer to fi g. D)
If this function is activated the mode LED
corresponding to the chosen steam setting starts
fl ashing.
Descaling
(for details refer to fi g. E)
The system will remind you to descale it regularly
independent of the type of water used. Descaling
can be performed at any time needed even when
not indicated by the system.
If the clean LED (2) and the acoustic signal turn
on during an ironing session, it is possible to
continue ironing. There is no need to perform the
cleaning immediately. The cleaning procedure can
be performed when the ironing session has been
fi nished or next time the appliance is switched on.
If the appliance is switched off without having
performed the cleaning process, the clean LED
and acoustic signal will turn on again when it is
next switched on. In case the steam emission
is deactivated the cleaning procedure must be
performed in order to proceed steam ironing.
Caution: Do not leave the appliance unattended
during the descaling process.
Always perform the descaling process with the
cleaning vessel . Do not interrupt the process by
lifting the iron up from the cleaning vessel, as hot
water and steam will come out of the soleplate.
Caution: The cleaning vessel can be hot and
contains hot water, take care while moving and
emptying it.
5712812461_IS3132_3155_3157_KR.indd 12 5712812461_IS3132_3155_3157_KR.indd 12 16.12.20 15:13 16.12.20 15:13