BRASSELER USA VE Beam Headlight Скачать руководство пользователя страница 4

 Warnings

Battery

• Inspect battery pack prior to use. 

• Do not dismantle, puncture, crush, or incinerate. 

• If the battery pack is dropped or receives a mechanical 

impact, ensure that the casing is not cracked or damaged. 

• Do not use damaged battery packs. 

• The electrolyte contained within the lithium cells can cause 

irritation to the respiratory tract, eyes and skin.

• In addition, cell venting could result in air contaminants, 

including corrosive or flammable vapors. All precautions 
should be taken to limit exposure to the electrolyte vapor. 

Lamp Head

•  Turn the lamp head off when not in use. The lamp housing 

can get hot.

•  Do not use the lamp if ambient temperatures exceed 30°C 

(86°F).

•  When lamp is in use, always keep the front of the light at 

least 6 inches from skin and any surface being illuminated.

• Avoid shining the lamp into patient’s eyes.

• Do not allow contact of the lamp to the patient.

•  Use a curing filter when working with any light-curable resins.

Charging

•  When charging the battery pack, inspect the charging lights to 

ensure that charging is active.

•  Do not simultaneously touch the charging unit (when plugged 

in) and the patient.

• Supplied Li-ion batteries can be dangerous and even explode  

if improperly charged. The battery pack is designed to be 
charged only by the supplied charging accessories.

•  Do not position the battery charger so it is difficult to 

disconnect the power adapter from the wall.

General

  Check all components for burrs, nicks, and sharp edges prior 

to use.

•  If unit is jarred or dropped, re-inspect prior to use.

•  Do not use the Brasseler VE Beam headlight system or charge 

the battery in an oxygen-rich environment.

•  Do not store liquids above the charger, battery pack or any 

other Brasseler VE Beam component or accessory.

•  If a spill occurs to the charger, battery, lamp head or battery 

pack, discontinue use. Using the charger after liquid is spilled 
into the unit could result in electrical shock.

• Clean only as directed.

•  Portable RF communications equipment (including 

peripherals such as antenna cables and external antennas) 
should be used no closer than 30 cm (12 inches) to any 
part of the Brasseler VE Beam system, including cables 
specified by the manufacturer.  Otherwise, degradation of the 
performance of this equipment could result. 

•  Use of accessories, transducers and cables other than those 

specified or provided by the manufacturer of this equipment 
could result in increased electromagnetic emissions or 
decreased electromagnetic immunity of this equipment and 
result in improper operation. 

• Use of this equipment adjacent to or stacked with other   

equipment should be avoided because it could result in  
improper operation. If such use is necessary, this equipment  
and the other equipment should be observed to verify that 
they are operating normally.

• Removing the power adapter from the wall outlet is the 

means of isolating the headlight from the supply means.

• Compliance with radiated emissions and immunity 

Standards:  Complies with RF Emissions test per CISPR 11 
Group 1 Class B; and Immunity test per IEC 60601 test level 
for ESD, EFT, Surge, Power Frequency, Voltage, Conducted RF 
and Radiated RF.

Warranty

Brasseler warrants its products to be free of original defects 
in material and workmanship and to perform in accordance 
with specifications.

One-Year Limited Warranty  
All components of headlight and battery pack system.

Warranty Exclusions:

•  Breakage or failure due to tampering, misuse, neglect, 

accidents, modification or shipping.

•  If the product is not used in accordance with manufacturer’s 

recommendations or instructions.

•  If repaired or serviced by anyone other than Brasseler.

Prompt inspection and reporting of missing or damaged      
product should be reported to shipping carrier and Brasseler 
within 3 days of receipt of product.

If Brasseler products or any component thereof are found to 
be defective or at variance with the product or  
component(s) it will be replaced at no cost to the purchaser. 
This warranty only applies to products purchased new from 
Brasseler.

For any questions or problems, please contact your local 
Brasseler representative or call Brasseler VE Loupes & Lights 
Care at 888-325-4993 between the hours of 8am to 5pm 
(Pacific Time) Monday-Friday.

BrasselerUSA.com

English

Содержание VE Beam Headlight









Отзывы: