BRASSELER USA VE Beam Headlight Скачать руководство пользователя страница 2

Device Description and Intended Use

Brasseler VE Beam headlight is a fully portable lighting system worn by the operator and is intended to 
illuminate the working area. It can be worn on a headband or attached to all types of magnification loupes. 
It is powered by a small, lightweight battery pack that is clipped to the operator’s waist. The rechargeable 
lithium-ion battery provides 10 hours of bright, focused light between charges.

Contents

 

1. Battery pack charger adapter
2. Battery pack charger cord
3. Battery pack
4. Lamp head with cable
5. Curing filter
6. Elastic strap
7. Shirt clip

Cleaning Instructions

Proper cleaning and maintenance is imperative as well as protection from rough use and improper storage. 
Cleaning with a low-alcohol (<25%) solution is recommended. If using spray cleaner, do not spray liquid 
directly on the unit. Instead, spray onto a soft no-scratch cleaning cloth, such as the one provided, and wipe 
the product as per the solutions' directions for use. Using paper products can scratch lenses. Should you have 
any questions, please call Brasseler VE Loupes & Lights Care at 888-325-4993.

 

CAUTION

• DO NOT SUBMERGE PRODUCT OR SUBJECT TO SURFACE SATURATION WITH ANY LIQUID OR ULTRASONIC CLEANER.
Your product is not waterproof.
• DO NOT USE WITH ANY POWER ADAPTER, CHARGER CORD, OR BATTERY PACK OTHER THAN PROVIDED BY BRASSELER.
• DO NOT STERILIZE VIA AUTOCLAVE, CHEMICLAVE, GLUTARALDEHYDE, IODOPHOR, OR ANY OTHER STERILIZATION METHOD.
• NO MODIFICATION OF THIS EQUIPMENT IS ALLOWED
• THIS UNIT CONTAINS A LITHIUM-ION BATTERY. AS A RESULT PLEASE BE SURE TO NOT STORE THE UNIT UNCHARGED 
FOR AN EXTENDED PERIOD OF TIME AS THIS MAY CAUSE THE BATTERY TO DISCHARGE AND REDUCE THE LIFETIME OF 
THE UNIT.

Replacement Parts

Part Number

Replacement Parts

Part Number

Lamp Head

LED6

Battery Pack

LED6-BP1A-BR

Replacement Lamp Head Cable

LED6-C

Battery Pack Charger Cord

LED-BP-CC

Curing Filter

LED6-F

Battery Pack Charger Adapter

LED-BP-CA

Operating Environment: 

• 10° - 30°C (50° - 86°F)
• 95% or less relative humidity
• 70kPa – 106kPa

Transport/Storage:

• 0° - 40°C (32° - 104°F)
• 95% or less relative humidity
• 70kPa – 106kPa

Technical Data:

Headlight System: Internally powered by 3.7Vdc(    ), 
6700 mAH rechargeable lithium-ion battery pack
    
Beam (LED6-BP1A): 470mA

Power Supply: 100 – 240Vac(~), 50/60 Hz, 0.5A

3

FIG. 1

2

6

7

1

5

4

BrasselerUSA.com

English

Содержание VE Beam Headlight









Отзывы: