• The handpiece is designed only for clinical dental treatment use by qualified personnel.
• When operating the handpiece always consider the safety of the patient
• Always operate the handpiece with a bur in the handpiece
• Check for vibration, noise and overheating outside the patient’s mouth prior to use. If any abnormalities are found, stop using
the handpiece and contact Brasseler USA.
• Do not drop the handpiece.
• Do not attempt to disassemble the handpiece or tamper with the mechanism.
• Do not connect or disconnect the bur and/or handpiece until the motor has completely stopped.
• Before use always confirm that the bur is correctly seated and locked into place.
• Do not use bent, damaged or sub-standard burs. This may cause shank bend or break even within the recommended speed.
• Always keep bur shanks clean. Dirt or debris in a chuck could cause poor bur concentricity or low chuck retention force.
• Do not use the bur other than those recommended by Brasseler USA and do not exceed the speed recommended by the
bur manufacturers.
• Always operate with water spray. Failure to do so may result in OVERHEATING.
• Perform periodic maintenance checks
• Do not apply excessive load to handpiece when operating
Caution
