Brasilisa CIAO +, Инструкция по эксплуатации

Страница: 32 / 39

Rev 0 - 07-2008
ENGLISH / 29
14. DRINKS SUPPLY
PRELIMINARY SUPPLY.
CAUTION! Finish the machine installation and programming
operations, and perform a components cleaning cycle before
assessing the drink supplied
Group:
Perform supplies for 1 or 2 minutes.
Steam:
Supply steam from the nozzle for about 1 or 2 minutes, using the special commands.
Water:
Supply water from the nozzle for about 1 or 2 minutes, using the special commands.
1 - DRINK SUPPLY (For example: ESPRESSO coffee supply):
a) Make sure that the hopper contains coffee beans.
b) Place a cup under the supply spout and press the ESPRESSO button: the selected button LED will be on
• The display will show: "Espresso"
• At the end of the supply, the display will show the message: “Select”
2 - DOUBLE DRINK SUPPLY (For example DOUBLE ESPRESSO supply):
a) Make sure that the hopper contains coffee beans.
b) Place two cups under the supply spout and press the 2X + ESPRESSO buttons: the selected buttons LEDs will be on.
• The display will show: "Espresso"
• At the end of the supply, the display will show the message: “Select”
3 - INCREASED DOSE SUPPLY (if the XL is enabled) (For example: ESPRESSO coffee supply):
• Place a cup under the supply spout and press the XL + ESPRESSO buttons: the selected buttons LEDs will be on
• The display will show: “Espresso”
• At the end of the supply, the display will show the message: “Select”
4 - HOT WATER SUPPLY:
To obtain the hot water supply, press the "HOT WATER" button on the push-button panel. The capacity is dosed according
to the value inserted during the programming phase, and the drink suppy ends automatically.
5 - STEAM SUPPLY:
Press the "STEAM" button on the push-button panel (WHEN ENABLED). The steam emission will cease when the
temperature set up during the regulation phase is reached. If you wish to end the supply in advance, press the button once
again.
VERSION WITH HYPERWAND (optional):
• If you wish to supply steam to make FROTHED MILK, proceed as follows:
- Press the "HYPERWAND - FROTHED MILK" button on the push-button panel and then press "HYPERWAND”. The
steam emission will cease when the temperature set up during the regulation phase is reached.
• If you wish to supply steam to make HOT MILK proceed as follows:
- Press the "HYPERWAND" button on the push-button panel. The steam emission will cease when the temperature set
up during the regulation phase is reached.