Safety First
2-6
Digital Compact
2.5
Designated Use of the System
Complying with this manual is the prerequisite for the designated use
of the unit.
The Ultrasonic Power Supply Digital Compact may only be used in
combination with BRANSON welding tools (horns), boosters, and con-
verters specified in the confirmation of order unless other is agreed on
by the client and BRANSON in written form.
The user is responsible for connection to or installation in third-party
systems.
The entire ultrasonic welding system serves to join thermoplastic res-
ins unless other is agreed on by the client and BRANSON in written
form. The designated processing methods particularly include ultra-
sonic welding, embedding, riveting, spot welding, flanging and detach-
ing of thermoplastic materials as well as for cutting and sealing of ther-
moplastic fibres and foils. The materials to be processed must be
agreed on with BRANSON Ultrasonics.
The tools used are specially designed for the part to be worked. There-
fore, they are different in their designs. The materials for tools including
the fastening screws and applicable torque are specified.
Automatic feeding attachments, fixtures and similar are not part of the
machine.
The details of the order and the confirmation of order are binding for
the user. Any other or extended use has to be regarded as not comply-
ing with the designated use.
The data for the permitted load is listed in chapter 4.5.
In case the power supply is used for purposes other than specified
above or in case it is used with a higher than the permitted power out-
put it might be damaged or cause damage to other components or sys-
tems connected. Also, this might result in injury and consequential
damage.
2.6
Validity of this Operating Manual
These instructions are valid for the entire system. Specific safety regu-
lations for components used in the system are not affected by these
instructions.
