3
OPERATING INSTRUCTIONS_____________________________________________________________
1)
Turn the power switch to the ON position.
2)
Lower the inspection platform completely using the hand control valve at the tool tray.
3)
Pull the bead hooks up and away from the center of the machine.
4)
Roll a tire up the ramp and center it on the rollers. Lower the bead hooks inside the tire making sure the bead rollers
are inside the tire bead. The vertical position of the bead hooks is adjustable using the quick pin release on the side
of the bead hook arm.
5)
Steady the tire while raising the inspection platform to a comfortable working height.
6)
Use the tire spread hand control valve at the tool tray to spread the tire as required. The light can be positioned to
view any portion of the tire.
NOTE
: If the tire is lifted off the rollers when spread, release spread and move spread hooks to a lower position.
7)
Rotate the tire using the foot controls. Release the foot pedal to stop rotation for inspection. Rotation speed can be
adjusted using the Speed Control dial. Repeat this operation until inspection is complete.
8)
When inspection is complete, close the bead hooks fully and swing them up and out of the tire. Move the light fixture
out of the tire.
9)
Lower the inspection platform completely and roll the tire off the rollers and down the ramp.
10)
Turn the power switch to the OFF position.
ADDITIONAL FEATURES__________________________________________________________________
1)
There are 4 air tool ports located below the tool tray. Attach a
1/4” NPT quick coupler to each port and attach air tools
as needed.
2)
There are two electrical outlets located on the control column. The power switch must be in the ON position to supply
power to these outlets.
MAINTENANCE_________________________________________________________________________
MONTHLY
–
Inspect unit for air leaks and wear or damage on pins and rollers.
Lubricate all moving parts (bolts, hinges, rollers, etc.) with a lubricating oil.
YEARLY
- Grease all bearings using grease zerks.
CAUTION
Before servicing machine disconnect air line from the unit and unplug
the power cord.
