Brandt WTC96100, Инструкция по эксплуатации

Страница: 6 / 12

6
4 / PROGRAMMING YOUR MACHINE
•PROGRAMMING
Information:
All the buttons are on micro-
switches and do not remain depressed.
In any case, the”Start/Pause” button
cannot cancel a programme.
Important :
Before starting your machine,
check that the power cable is plugged
in and the water tap is open. Also
ensure that the drum doors are closed
correctly and the machine’s lid is shut.
During the “End of Cycle” phase, any
action on one of the controls (the
selectors or the buttons) returns you to
“Programming” mode. As a safety
measure, when the cycle is over, we
recommend that you unplug the power
cable and turn off the water tap.
•Programming a washing cycle:
Display and position of the selectors
— Turn the selector to choose the most suitable programme and washing temperature for
the type of fabric to be washed.
NB: Turning the selector to any position other than “ OFF ” provides power to the machine.
— Using the selector , choose:
- Either a suitable spin speed for your type of washing.
The spin speed is automatically restricted in the “Mixed/Synthetics” and “Wool/Delicates”
programmes.
- Or drip dry.
The cycle will finish with a gentle spin at 100 rpm.
- Or stop with tub full of water.
Your machine will stop with the tub full of water before the final spin.
— Use the buttons to select any options you wish.
— Select immediate start by pressing “Start/Pause” ...
— ... or select a start delayed by 1 to 19 hours by pressing button (
for how to do this,
see the section ”DETAILS OF THE OPTIONS • Delayed start”) and then press
“Start/Pause” .
5
3
5
4
2
1 In , display of the length of the selected
programme
for example:
Selector on
- Position “800” for example
- Position ”100”
- Position ” ”
Light(s) for the option(s) selected
Countdown in of the time remaining before the
end of the cycle
(the two dots flash throughout the whole of the cycle)
Display of the symbol in and countdown of
the time remaining before the cycle actually starts.
An animation (four small elements turning on
themselves) shows the waiting period before the
start of the cycle.
A
A
2
A
— Press the "Start/Pause" button to interrupt the cycle.
— Add or remove the items of laundry.
The time the lid remains locked depends on the temperature inside the machine and, for
safety reasons, may take several minutes if you are interrupting a cycle at more than 40
°C.
— Press the "Start/Pause" button to restart the cycle.
NB: If you have selected a delayed start, you can access the drum instantly at any time in the
period before the washing cycle starts without having to interrupt and restart the cycle.
5
5 Countdown of the time is stopped in
(the two dots are constantly lit)
Resumption of the countdown in
(the two dots start flashing again)
A
A
•Adding or removing an item during the cycle
(impossible during spin):
•Cancelling while programming, washing or during a pause:
— Set the selector to the “ OFF ” position.
This can be done at any time during the cycle or during programming, or even during a pause.
NB :
- In all cases, after cancelling you must reprogramme everything from the start.
- If you have cancelled during the washing phase, remember to empty the water, if necessary.
1
Selector set to ” OFF ”
All the indicator lights and the display are OFF
1
•End of the cycle:
NB: After spinning, some models automatically position the drum opening at the top to
provide easy access to the washing. This operation lasts at most 3 minutes.
— Screen
then displays ” - 0 - ”, indicating that the cycle has finished.
Set the selector to the “ OFF ” position.
You can now open the lid and remove your washing.
1
A
Options Delayed start setting
Start/Pause Display of remaining time
or delayed start Nature of the washing and
the temperature
Spin speed setting
5
A
2 3 4
1