Brandt TI213BS1, Руководство по эксплуатации

Страница: 49 / 124

49
Installing your hob in all simplicity
C
hanging the type of gas supply (cont'd)
When carrying out this operation, you
should successively:
➊
Adapt the gas connection
❷
Change the injectors
❸
Adjust the retarder on the taps
➊
A
DAPT THE HOB CONNECTION
to the
new gas adjustment. Refer to the pa-
ragraph “Gas connections” .
❷
C
HANGE THE INJECTORS
in the follo-
wing way:
• Remove the supports, and all the
burner caps and heads.
• Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1) .
• Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪
Screw in the injectors by hand
until they are tight.
➪
Put the spanner well onto the
injector.
➪
With a pencil draw a line on the
hearth plate as indicated (fig. 2) .
➪
Turn the spanner clockwise
until the line appears on the
other side (fig. 3) . Warning!
Do not go beyond this limit
as you are
liable to cause damage.
➪
Put the burner heads, covers
a n d p a n s u p p o r t s b a c k i n
position.
●
Transforming from butane / propane
gas to natural gas or to butane /
propane air
Spanner
Spanner Line
Line
Fig. 3 Fig. 2
Grill
Cover
Head
Dish
Glass top
Fig. 1
99625701_ML_B.qxd 19/11/04 09:02 Page 49