Brandt H550 Series Скачать руководство пользователя

Страница: 49 / 89

Heavy Haul Trailers

WARNING!

A direct visual inspection is required to assure a proper coupling. Several types of

improper couplings will pass the initial pull test and the sound is unreliable. Do not take for
granted that the trailer is properly coupled.

Connect the light cord and the brake lines and be sure any slack in the lines is supported and the

brake lines do not become tangled.

If your fifth wheel is equipped with a manual secondary lock, check to see that it is properly

engaged.

Attach the trailer air lines and electrical cord to the gooseneck.

3.5.1.2

Uncoupling the Fifth Wheel

Set the emergency brake on the tractor.

Set the trailer brakes with the tractor trailer protection switch.

Block the trailer wheels.

The suspension air should be dumped from the air bags after the trailer parking brake is applied.

Disconnect the light cord and brake lines.

Ensure the anti-dive pin is in place and locked. If not, the Gooseneck will fall to the ground.

Unlock the fifth wheel, including the manual secondary lock if so equipped. Dump the suspension

system if the tractor is equipped with an air ride suspension.

Release the tractor emergency brake and pull out slowly from under the trailer. Let the trailer roll

down the fifth wheel and pick up ramps.

Содержание H550 Series


























































































Результаты поиска

Содержание H550 Series

Отзывы:

Похожие инструкции для H550 Series

Бренды по названию

Популярные бренды

Brandt H550 Series, Руководство пользователя

Результаты поиска

Содержание H550 Series

Отзывы:

Похожие инструкции для H550 Series

Бренды по названию

Популярные бренды