Brandt GE2302B, Инструкция по эксплуатации

Страница: 35 / 120

35
and the environment, and to recycle materials to save energy and significant
resources.
A logo appears on the product reminding you not to discard it with household waste.
For further information, contact your council offices or the shop where you bought this
product.
Your appliance also contains various recyclable materials. Thus it is stamped with this logo to
indicate to you that used appliances should be mixed with other waste.
The recycling of appliances organised by your manufacturer will therefore be carried out in the
best possible conditions, in compliance with the European directive in force concerning electrical
and electronic equipment waste. Contact your Town Hall or your retailer to find out where the
points for the collection of used machines nearest to your home are. Thank you for helping to
protect the environment.
2) INSTALLING YOUR APPLIANCE
a) Before Installation
Caution:
Check that your machine has not been damaged during transport (door or seals distorted,
etc.).
If you note any damage whatsoever before use, do not install the oven if it is damaged and
contact your retailer.
Remove the packaging and put the accessories aside.
Control Panel: Remove the protective film from the surface of the control panel.
Do not remove the light brown Mica coating which is found in the cavity of the oven
and which protects the magnetron.
b) Installation
1. This product must not be built in.
Leave at least 30 cm of free space above the oven and 20 cm at the sides (Fig 1).
Do not take the feet off the oven.
Do not obstruct the air vents as you risk early damage to your machine.
Fig. 1
30cm
20cm
20cm