The following things should be checked before starting the dishwasher.
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
1
The dishwasher is
and fixed properly
levelled
2
The inlet valve is open
3
Fill hose connections are fully tightened and not leaking
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are knotted
7
All packing materials and printings
have been removed from the dishwasher.
Extension Hose
If you need a drain hose extension, make sure to use a sim ilar drain hose.
It must be no longer than 4 metres; ot herw ise the cleaning effect of the dishwasher coul d be reduced .
Water Outlet
Connect the water drain hose. The drain hose mu st be cor rect ly fit ted t o avoid water lea ks.
Ensure that the w ater dra in hose is no t kin ked or squashed.
If th e sink is 1000 higher from the floor, the excess wat er in hoses cann ot be drained dire ctly
into the sink. It will be necessary to drain excess w ater from hoses into a bo wl o r sui table
containe r that is held out side and lower th an t he sink.
How to Drain Excess Water From Hoses
Syphon Connection
The di stance betwe en t he d rain con nect ion and the b otto m o f the app lian ce m ust n ot be longer than 1000m m.
The wa ter drain hose sh oul d be fixed.
