EN-7
Note:
Nano 7, iPad 4 and iPad mini does not support
MENU function.
Note:
If the iPod/iPhone/iPad is not docked and there
is no operation within 15 minutes, this unit will
switch to STANDBY mode automatically.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
while the unit is connected to AC power.
Remove the iPod/iPhone/iPad
1. Pull the iPod/iPhone/iPad out of the dock.
2. Raise up the buckle
1
, and rotate the
dock module to original position
2
.
Play With Bluetooth Device
You can listen to music from a bluetooth-
enabled device via this player.
Pair Bluetooth-enabled Devices
Manually
The first time you connect your bluetooth
device to this player, you need to pair your
device to this player.
Note:
- The operational range between
this player and a Bluetooth device is
approximately 8 meters.
- Before you connect a Bluetooth device
to this unit, familiarize yourself with the
Bluetooth capabilities of the device.
- Compatibility with all Bluetooth devices
is not guaranteed.
- Any obstacle between this unit and a
Bluetooth device can reduce the
operational range.
- Keep this player away from any other
electronic device that may cause
interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to bluetooth,
Display panel shows "BLU T", then shows
"NO BT" (if no bluetooth device is
connected).
3. Press and hold "
BF
/
BT
" button on
remote control for a few seconds to
activate bluetooth pairing mode,
display panel shows "PAIR".
4. Search for bluetooth device with your
device.
5. Select “
BLUEPORT
” in the pairing list.
6. Enter default password “0000”, if the
pairing succeeds, display panel shows
"BLU T" again.
7. To disconnect connection, turn off the
bluetooth function on your device or
switch the player to another source.
Tip
- If a connection exist, hold and press
"
BF
/
BT
" button on remote control
for a few seconds to re-activate the
pairing mode, the connection will be
interrupted.
- If no other bluetooth device pairs
with this player within two minutes,
the player will recover its previous
connection.
- The player will also be disconnected
when your device is moved beyond the
operational range.
- If you want to reconnect your device
to this player, place it within the
operational range.
- If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected to the player.
- If they are connected, display panel
shows "BLU T".
- If the connection is lost, display panel
shows "NO BT". Follow the instruction
above to pair your device to the player
again.
Downloaded from www.vandenborre.be
