13
Changing the type of gas
SWITCHING
FROM
TOWN
GAS
TO
LPG
GAS
Connecting the gas supply
●
LPG
CONNECTION
Gas supplied by tank or cylinder.
For your safety, you must choose this
connection :
Connection with a reinforced rubber hose
with screw-on mechanical connectors.
In an existing system, a soft pipe
fi
tted
with clamps whose service life is
fi
ve
years may be used. It is necessary in this
case to use an adapter without forgetting
to
fi
t a sealing washer between the
adapter and the hob’s elbow.
Tip
You can obtain the adaptor and the
sealing washer from your After-sales
Service Department.
When carrying out this operation, you
should successively:
Change the injectors
Adjust the retarder on the taps
C
HANGE
THE
INJECTORS
in the following way:
• Remove the supports, and all the bur ner
caps and heads.
• Using the spanner supplied, unscrew the
injectors at the bottom of each dish and
remove them
(
fi
g 1)
.
• Replace these with the injectors supplied in
the wallet, in accordan ce with the gas rating
table at the end of the chapter ; to do this:
Screw in the injectors by hand un til they
are tight.
Put the spanner well onto the in jector.
With a pencil draw a line on the hearth
plate as indicated
(
fi
g. 2).
Turn the spanner clockwise until the
line appears on the other side
(
fi
g. 3).
Warning! Do not go beyond this limit
as you are liable to cause damage.
Put the burner heads, covers and pan
supports back in position.
A
C
B
A
Seal (not provided)
B
Adaptor (not provided)
C
Clamp (not provided)
Warning
Screw on the adaptor with a
torque not exceeding 25 N.m.
Fig. 02
Fig. 01
Fig. 03
Line
Spanner
Spanner
Line
Grill
Cover
Head
Dish
Upper side of the hob
