EN 5/ USING THE APPLIANCE
BEFORE GETTING STARTED
…
The appliance emits an acoustic signal when
o
rotating the data knob
o
pressing the keys
o
the cooking process is finished
Opening the door interrupts the cooking process. To restart it, press
START
.
If a programming is not finished and without action on control elements during one
minute, the programming is cancelled and the appliance returns to displaying the
daytime.
SETTING THE CLOCK
Before using the appliance, you must set the clock..
After connecting the appliance, « 0 :00 » shows in the display and an acoustic signal is emitted.
Press the
Timer
ts blink in the display.
/Clock
key twice. The hour digi
Set the hours from 0 to 23 with the
Data
knob
Confirm by pressing the
key. The minute digits blink in the display.
Set the minutes from 0 to 59 with the
Data
knob.
Confirm by pressing the
key.
The clock is now set, the two points between hours and minutes are blinking.
MICROWAVE COOKING
Press the
Microwave power
key
.
The maximum power level (= 100%) shows in the display :
P100. For lower power levels, press the
Microwave power
key until the required power level
is reached. The display shows the selected power level:
Display
P100
P80
P50
P30
P10
Power level
Max
~
550 W ~ 350 W ~ 200 W ~ 70 W
Set the cooking time (from 5 sec to max. 95 min) with the
Data
knob. The cooking time is
incremented
Between 0 and 1 min
in steps of
5 seconds
Between 1 and 5 min
in steps of
10 seconds
Between 5 and 10 min
in steps of
30 seconds
Between 10 and 30 min
in steps of
1 minute
Between 30 and 95 min
in steps of
5 minutes
Start cooking by pressing the
Start
key.
EN-18
Timer/Clock
Timer/Clock
Press the
Start
key to confirm the selected power.
