EN 2 / INSTALLATION
ELECTRICAL CONNECTION
Important
:
Electrical safety must be provided by
a correct build-in. During installation and maintenance
operations, the appliance must be unplugged from the
electrical grid; fuses must be cut off or removed..
The electrical connections are made before the appliance
is installed in its housing.
The oven must be connected with a power cable
(standardized) with three 1.5 mm 2 conductors
H05RN-F
3G
de
1 mm²
(1 ph + 1 N + ground) that must be
connected to a monophase 220-240 V network via an IEC
60083 standardized receptacle (1 ph + 1 N + ground lead)
or in accordance with installation rules. The safety wire
(green-yellow) is connected to the appliance’s terminal and
must be connected to the ground lead of the electrical set-
up.
Do not use your appliance immediately (wait
approximately 1 to 2 hours) after having moved from a
cold location to a hot location because the condensation
may cause a malfunction.
Important
: We cannot be held responsible for any
accident resulting from an inexistent, defective or
incorrect ground lead.
EN-12
