Daily Use
15
5.
TROUBLESHOOTING
Caution!
Before troubleshooting, disconnect the power supply. Only a qualified electrician of
competent person must do the troubleshooting that is not in this manual.
Important!
There are some sounds during normal use (compressor, refrigerant circulation).
Problem
Possible cause
Solution
Appliance is turned off.
Press “Adjust” button for 5 seconds to
turn on the appliance.
Appliance does not
work
Mains plug is not plugged in
or is loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too warm.
Temperature is not properly
adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm
food was placed in the
appliance within the last 24
hours.
Temporarily set a colder temperature
The appliance is near a heat
source.
Please look in the installation
location section.
Appliance cools too
much
Temperature is set too cold.
Temporarily set a hotter temperature
Unusual noises
Appliance is not levelled
Adjust the wood cabinet if it is not
levelled.
The appliance is touching the
wall or other objects.
Move the appliance slightly.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend the
component out of the way.
Water on the floor
Water drain hole is blocked.
See the Cleaning section.
If your appliance is still not working properly after making the above checks, please contact the After
Sales Center.
