Brandt BI 80, Инструкция по использованию и установке

Страница: 10 / 11

14 15
Technical data
Operating voltage 220/240 V
∼
50/60 Hz
Total power consumption 5600 W
Dimensions of unit cut-out
Width
750 mm
Depth 410 mm
Maximum space required under the worktop 58 mm
Overall dimensions under the worktop
Width
745 mm
Depth 488 mm
Overall dimensions above the worktop
Width
810 mm
Depth 510 mm
Weight 15,3 kg
Manufacturer N°214
Neutral
Earth
Live
N L
- 220/240 V single phase
Connect the three wires to your mains supply,
in accordance with the colour of the wires.
Remarks
- When your hob is first connected to the power supply or after a long power cut, a co-
de lights up on the keypad. It disappears automatically after about 30 seconds or the first
time any of the touch controls on the keypad is pressed. This display is normal and re-
served for the use, as required, of your After Sales Service.
When connecting to a 400 V 2N three phase mains supply, if your hob malfunctions,
check that the neutral wire has been connected properly. These precautions will also
protect your other electronic appliances.
, @ € À , @ € À , @ € À
Neutral
Earth
Live 2
Live 1
N
L 1 L 2
NB
separate the 2
live wires L1, L2
before
connecting
Blue
Blue
Green / yellow
Blue sleeve
Black
Black sleeve
- 400 V 2N three phase
Connect the four wires to your mains supply,
in accordance with the colour of the wires.
Your mains fuse must be: 32 amp
,
,
@
@
€
€
À
À
,
,
@
@
€
€
À
À
,
,
@
@
€
€
À
À
Green / yellow
Blue
Blue
Blue sleeve
Black
Black sleeve
Electrical Connection
These hobs are supplied with an 05 VVF power supply cable (cross-section 1.5 mm 2 ),
with 5 cores (of which one for the earth: yellow/green) and should be connected to the
mains by a socket which complies with the EEC 7 regulations or by using a double-pole
circuit breaker with a contact gap of at least 3 mm.
If this power supply cable is damaged, or if you wish to change it, it can only be repla-
ced by your After Sales Service as this requires specialist tools.
•
To benefit from the guarantee on your hob, do not forget to have your “Guarantee
Certificate” dated and signed by your retailer-installer.
•
All repairs must be carried out by a qualified technician. The distributors of our
make are the only people who:
- H
AVE COMPLETE KNOWLEDGE OF YOUR APPLIANCE
AND ITS OPERATION
,
- F
ULLY EMPLOY OUR TECHNIQUES OF ADJUSTMENT
,
MAINTENANCE AND REPAIR
,
- U
SE EXCLUSIVELY GENUINE SPARE PARTS
•
Any repair carried out as a result of installation or use which is not in confor-
mity with the instructions in this booklet will not be accepted under the
terms of the manufacturer's guarantee which will be terminated.
•
In the event of a complaint or to order spare parts from your distributor, give him
the complete reference details for your appliance (appliance model and type and
full serial number). This information appears on the back of your instruction
book.
•
T h e d e s c r i p t i o n s a n d t e c h n i c a l d a t a w h i c h a p p e a r i n t h i s b o o k l e t a r e
for information only and are not legally binding. In the interests of product quality,
w e r e s e r v e t h e r i g h t t o c a r r y o u t a n y n e c e s s a r y c h a n g e s a n d
improvements without prior notice.
•
GENUINE SPARE PARTS
: ask your dealer to ensure only
CERTIFIED GENUINE SPARE
PARTS
are used in any repair.
For the installer
After Sales Service