Brandt BFL545YBW, Инструкция по эксплуатации

Страница: 31 / 48

EN - 31 -
Temperature Warning:
The temperature display flashes “LC” and an audible warning sounds, when the tempera -
ture in the cooler compartment is too warm.
A rise in the temperature may be caused by;
• Frequent door opening for long periods of time
• Loading with large quantities of warm foods
• High ambient temperature
• An error with the appliances.
Check Warnings;
Your fridge warns you if the temperatures for cooler departments are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the cooler Depart-
ment Indicators. Warning codes appear in the cooler Compartment Setting Displays.
Also a warning sound are heard.
Showing code and buzzer will continue until you pushes SET or MODE button. When you
push one of these buttons, buzzer will stop. “LC” warning will be disappear in 15 minutes.
You don’t have to call your service, this condition may appear due to reasons above. You
can keep storing your foods in your fridge. If “LC” warning will not disappear in an hour after
pressing the button, you can call your service.
If your fridge is operating too loudly;
Compressor noise
• Normal motor noise. This noise means that the compressor operates normally Com-
pressor may cause more noise for a short time when it is activated.
Bubbling noise and splash:
• This noise is caused by the flow of the refrigerant in the tubes of the system.
Air Blow Noise:
• Normal fan noise. This noise can be heard in fridge during normal operation of the sys-
tem due to the circulation of air.
If humidity builds up inside the cooler;
• Are all food packed properly? Are the containers dried before placing them in the fridge?
• Is the ridge door opened frequently? Humidity of the room gets in the fridge when the
doors are opened. Humidity build up will be faster when you open the doors more fre-
quently, especially if the humidity of the room is high.
• Building up of water drops on the rear wall after automatic defrosting is normal. (in Static
Models)
If the door is not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door joints broken or torn?
• Is your fridge on a level surface?