Brandt AD9905B, Руководство пользователя

Страница: 8 / 12

1
4

Auto Linkage system
Set-up the hood and hob linkage via the Low Speed Button
on your hood.

The hood is factory set to non-linked mode.

If the hood and hob are not linked, operate the hood manually.
5 - Within 8 seconds, press and hold any of the kk
6 - Connection success.
7 - Once the pairing is done, the hood and the lights will turn on automatically
**If you do not hear 5 successive beeps, you will need to restart steps 1-5
again.
For additional assistance, please call Brandt Asie Pte Ltd for support.
RRRRRRRRR
knobs of the Auto Linked
gas hob, you will hear 5 successive beeps.
1 - Connect the hood to power source,it will beep once.
2 - Press and hold the "low speed" button for approximatively 8 seconds
until you hear 3 beeps.
3 - When the hood beeps 3 times, the low button light will keep shining,the
pairing mode is activated.
4 - Restart hood, by turning off and on the power source.
The hood will beep 3 times.
8 - In order to disable to Auto Linkage System, press and hold the "low speed"
button for 8 seconds.When the hood beeps once, the Auto Linkage has been
closed.

DUCTING VS. RECIRCULATING MODE
You can choose to install the hood as a ducting or recirculating

mode:
Ducting mode (Vented mode)
In the ducting mode, air is drawn into the hood, fat are trapped by
aluminum filters.
this mode, only the aluminum filters are installed.

Recirculating mode
In the recirculating mode, air is drawn into the hood, fats are trapped by the
filters, the air then passes through charcoal filters to remove cooking
odors, the purified air is then passed back into the kitchen.In this mode,both
the aluminium filters and the charcoal filters must be installed.
5
Odors, fumes and condensation are then expelled to the outside. In